Heat Pipe Solar Collector (CE, ISO, SGS)

Heat pipe solar collector

The Tiantian heat pipe solar collector is mainly composed of heat pipe, manifold and frame. Heat energy from the heat pipe condenser transferred to the fluid in the header then converts it into usable heat.

The heat pipe consists of vacuum glass tube, copper heat pipe and Al heat transfer fins. Vacuum tube transfers sunlight into heat energy, and then into the heat transferring fluid by fins around the copper heat pipe. Finally the energy will released at the condenser of the heat pipe inside the header.
1. Features
(1)High efficiency vacuum tube with selective coating, absorptivity arrives to 96± 2% and low emissivity 4± 2%;
(2)The heat pipe has a low thermal capacity, and rapid heat exchange (1000 times of copper heat exchange rate), heat exchange rate is up to 99%. The startup is fast, when heat pipe is heated to 25, within 5s, it will transfer heat;
(3) Special "TJ"design, make higher operation pressure, test pressure up to 11kg/cm2;
(4)No water flow in vacuum tube, no water scale, no tube explosion, even at -40;
(5) Rapid startup make it can get heat energy even under cloudy weather;
(6) Module design, easy to be installed and shipped. It can still working even several of the vacuum tubes broken, maintenance can be done no need to stop the system operation.
(7) Heat pipe make heat transfers in one way, avoid heat backflow in the night or bad weather.

2. Advantages of DAILY heat pipe solar collector
(1) Special design bigger condenser end, more heat collected, and faster heat transfer, less heat loss;
(2) Double layers insulation (rock wool+ PU) design for the header, better performance in high-temperature resistance and thermal insulation.
(3) Larger size header pipe, transfer more heat one time, avoid the circulating pump run frequently.

3. Picture